of extra flotation. You can do that I suppose but getting it right is gonna be kinda hard, too much angle and you get to much lift, not enough and they don't do anything and you are going to have to use some pretty thick aluminum so bendindg it by hand will be hard. Each small pod is 11 inches wide at the bottom. of extra flotation plus offers numerous other benefits! Our Flotation Pods not only increase the plane of your boat, but also offer up to 200 LBS. One of the most common questions we encounter when selecting a set of trim tabs is whether or not a Hydraulic Trim Tab system is the right choice. If you have pods, you probably will need to trim down a little more because the only pods I have seen (factory) actually cant up from the normal bottom line of the actual boat. i have large 24 x 24 x 8" flotation pods welded to the back of the transom to add bouyancy to the stern. View the Images or Click the Download Tab below to determine what size Pods we recommend for your boat.

To obtain maximum motor efficiency you need the longest plane possible.

I have an application for the use of some hydraulic actuated trim tabs for my big MOD V boat. If you mount them 2” above hull bottom the the boat will have to …

I'm thinking about adding fixed trim tabs to the back of our river boat to help lift the transom in the shallow stuff. I wanted to take an opportunity to answer the questions, talk a little more about floatation pods on a catfish boat (or any aluminum boat for that matter), what they do … Smaller boats will feel the benefits of trim tabs to an even greater extent than larger boats. Trim Tabs and Trailered Boats. View the Images or Click the Download Tab below to determine what size Pods we recommend for your boat.

Our Flotation Pods not only increase the plane of your boat, but also offer up to 200 LBS. Bass boats with high-pitch props can use the additional lift for an improved hole-shot.

Our Flotation Pods not only increase the plane of your boat, but also offer up to 200 LBS. They can also be helpful in getting the boat on step quicker since the extra flotation keeps the boat from sitting so deep in the transom. Hang around a boatyard, and you’ll hear at least one horror story about some unfortunate soul who was stranded, or worse, because his pods failed. This is great for shallow water motoring and for offsetting big heavy outboards. I've also ordered and plan to install Bennett SLT10 self leveling trim tabs this weekend. The Unknown. Bennett Marine, one of our top-selling brands, offers both standard hydraulic actuators or their electric “BOLT” actuators. Adding trim tabs can lift the rear of the boat when moving but do not actually fix the problem of an out of balance boat.

One is to use 'trim-tabs', which are basically a couple of pieces of metal attached to the transom with an electric or hydraulic method of adjusting the tabs.

With the pods mounted as low as possible, the boat rests pretty level and the boat jumps on plane with just me at the stern. ... when you say "trim it back up", does that mean trim tabs? of extra flotation plus offers numerous other benefits!

My question is how thick of plate do I need to use for it to be durable and able to take the occasional bottom bump at speed?

When pulling heavier skiers or multiple skiers, trim tabs provide the lift …